Monday, 12 December 2016

Notification to NSW and QLD Underground Coal Mines

“dimensional error”

Download Document

13th September 2016

Further to the above listed notification (attached) CMI is advising that the dimensional error listed on the certification drawing relating to the CMI “MINTO” AG314BQR / AG364BQR 300A 660V /1100V restrained receptacles has now been corrected and new certificates are attached.

The new amendment is indicated in certification drawing F-438 Rev K and relates to certificates for IECEx TSA 13.0005X-1 and ANZEx 13.3002 -1. Refer to location 3B on Section A-A of drawing F-438 where dimensions are recorded as Ø “92.3 / 62.4”. The correct dimensions should read Ø “ 92.3 / 92.4”

All other receptacles 300A, 425A 660V/1100V 3300V 4 and 6 pins are unaffected by this error.

If you require Certification Drawings listed on the above certificate please email your name and postal address details to allow for copy to be sent to;

CMI Electrical Products Michael Page Manager – Minto industrial Products

Cc: For distribution: Owen Barry; Senior Inspector of Electrical Engineering,

NSW Department of Industry Peter Herbert ; Department of Natural Resources and Mines QLD John Rose; ExTA Steve Abercrombie; MEMMES

Download this letter

Noddy A

By runnoddyrun

A Brunswick Athletics Club tragic!