Notification to NSW and QLD Underground Coal Mines - UPDATE
13th September 2016
Further to the above listed notification (attached) CMI is advising that the dimensional error listed on the certification drawing relating to the CMI “MINTO” AG314BQR / AG364BQR 300A 660V /1100V restrained receptacles has now been corrected and new certificates are attached.
The new amendment is indicated in certification drawing F-438 Rev K and relates to certificates for IECEx TSA 13.0005X-1 and ANZEx 13.3002 -1. Refer to location 3B on Section A-A of drawing F-438 where dimensions are recorded as Ø “92.3 / 62.4”. The correct dimensions should read Ø “ 92.3 / 92.4”
All other receptacles 300A, 425A 660V/1100V 3300V 4 and 6 pins are unaffected by this error.
If you require Certification Drawings listed on the above certificate please email your name and postal address details to allow for copy to be sent to;
CMI Electrical Products
Manager – Minto industrial Products
Cc: For distribution:
Owen Barry; Senior Inspector of Electrical Engineering,
NSW Department of Industry
Peter Herbert ; Department of Natural Resources and Mines QLD
John Rose; ExTA
Steve Abercrombie; MEMMES